论文部分内容阅读
对原油稳定工艺过程进行分析比较，找出适合于不同原油物性宜采用的加工工艺。原油稳定加工工艺主要有精馏法和负压法两种，根据原油中轻烃潜含量的差别，一般情况下，轻烃潜含量较高的宜采用提馏法，轻烃潜含量较低的宜采用负压法。针对轮南油田原油稳定工程的具体情况，对原油稳定工程生产的不凝气和轻烃进行深度处理、回收液化石油气。采用先进技术，优化工专职参数，搞好脱丁烷塔控制，使用自限式电热带替代热水拌热。通过以上措施，使整个工程能耗显著降低，做到工艺合理，控制先进。
Analysis and comparison of the stability of crude oil process to find suitable for different crude oil properties should adopt the processing technology. There are two main methods for the stable processing of crude oil: distillation method and negative pressure method. According to the difference of the light hydrocarbon latent content in crude oil, under normal circumstances, the higher light hydrocarbon content should adopt the method of stripping, the lower light hydrocarbon content Should adopt negative pressure method. According to the specific conditions of the crude oil stabilization project in Lunnan Oilfield, the non-condensable gas and light hydrocarbon produced by the stable oil project are treated in depth and the liquefied petroleum gas is recovered. The use of advanced technology, optimization of job-specific parameters, do a good debutanizer control, the use of self-limiting electric hot water instead of hot mix. Through the above measures, the entire project significantly reduce energy consumption, so that technology is reasonable and advanced control.