论文部分内容阅读
一、用途研磨解放牌汽车发动机气门。二、性能该机每次可以同时研磨12只气门(约需30分钟),比手工研磨提高工效10倍左右。其结构简单、制作容易、体积小、重量轻、便于携带。外观见下图。三、结构说明该机主要由电动机、主体上、下板、蜗杆轴、拨块轴、研磨杆、及支撑架等组成。电动机通过皮带传动驱动蜗杆轴转动,蜗杆轴一面带动磨杆旋转,同时,通过链条带动拨块轴使磨杆上下运动,从而完成对
First, the use of grinding Jiefang vehicle engine valve. Second, the performance of this machine can be grinding 12 valves at a time (about 30 minutes), than the manual grinding to improve ergonomics about 10 times. Its simple structure, easy production, small size, light weight, easy to carry. Appearance is shown in the figure below. Third, the structure description The machine is mainly composed of motor, main body, lower plate, worm shaft, dial block shaft, grinding rod, and support frame. The motor drives the worm shaft to rotate through the belt drive, and the worm shaft drives the grinding rod to rotate on one side. At the same time, the chain is driven by the chain to move the grinding rod up and down, thus completing the