自1953年1月我所创造”镁屑结”加镁法制造球墨铸铁成功后,我站即从事以镁、矽、焦屑结块,作球墨化一次处理试验,并获得成功。此方法名之为“镁矽屑混合结一次处理法”。自1953年2月份起即在昆明生产部门推广,”许多工厂已经采用。如某工厂每月铸造大小球墨铸铁铸件60余吨,经9个月的实际经验证明,可以获得100％的球化作用;克服了以往由于球化无把握而产生废品的严重现象。关于镁矽屑混合结的制造及使用问题,我站将目前已得经验报告如下,提供参考。 Since January 1953, when I created the “magnesium crumb knot” plus the magnesium method to make the ductile iron, I was engaged in the test of nodular melting with magnesium, silicon and coke crumbs, and succeeded in the test. This method is called “Magnesium Silicon mixed knot once treatment method.” Since February 1953, it has been promoted in Kunming’s production department. "Many factories have already adopted such as a factory which casts more than 60 tons of cast iron castings each month. After nine months of actual experience, it can get 100% spheroidization ; Overcoming the past due to the ball without the grave of the phenomenon of waste produced.For the magnesium chip mixing knot manufacturing and the use of the problem, I will now have the experience of the station as follows, for reference.