静贴腕击球法

来源 :门球之苑 | 被引量 : 0次 | 上传用户:hq520cyj
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
静贴腕击球法是集静棒、贴脚、腕力这三种击球法的优点于一体的击球法。静棒击球是槌头前端面直接向前击打自球击点,没有后拉动作,它减少了槌头先后拉、再前冲容易出现的摆动。贴脚击球是击球员左脚前伸,使槌头外侧微贴左脚内侧前部凸出部位,并使槌头前、后端面准确地放在四点一线的瞄准线上,形成正确的击球轨道,这样有助于防止击偏的问题。腕力击球是击球员的两个大臂夹紧胳肢身躯,小臂贴紧前腹部,使大臂固定不动,小臂相对固定,只用手腕力量击球,以减少槌头前冲时的晃动,提高击球精度。将静棒、贴脚和腕力三种击球法的长处合而为一地加以熟练掌握,是对原有击球法的改进和完善,击球效果会明显提高。在掌握这一击球法时要注意三点: Static stick wrist ball method is set static stick, foot, wrist force of these three kinds of hitting method in one of the batting method. Static shot hit the ball is the front end of the hammer straight forward hit from the ball hit point, there is no post-pull action, it reduces the hammer head has to pull, and then forward prone swing. Stick the ball hit the batter left foot forward, so that the outer side of the hammerhead slightly medial left front protruding portion, and the hammer head before and after the end face accurately on the line of sight at four o’clock to form the correct Hit the track, so help prevent the problem of knocking. Wrist ball hit is the batter’s two arm clamp arm body, arm close to the abdomen, the arm fixed, the arm is relatively fixed, only the wrist force hit the ball in order to reduce the hammer head before the red Sway, improve hitting accuracy. The static stick, foot and wrist force of three kinds of batting law into one of the advantages to be mastered, is the original batting method to improve and perfect the batting effect will be significantly improved. In the grasp of the batting law should pay attention to three points:
其他文献
比赛中轮及击球时,场内只有一个球称为孤球(为叙述方便,设定①球为孤球)。它怎样打才更有利于保持和扩大优势?根据场上态势权衡利弊正确选择占位尤为重要。那么,它应选择哪些
在太原市育英门球赛老年组比赛中,有这样一场球,比赛中红方屡遭挫折,白方频频得手,直到24分钟时,双方战成10∶6,白方领先。场上态势如图所示:轮及6号击球员,⑥球撞击⑧球闪送
李成章在离休后,于1986年随中铁一局去天津参加了铁道部举办的门球学习班,会后一局在咸阳地区首家成立了“火车头门球队”,门球运动很快向四面八方传开了,而李成章则在裁判组
铸造,俗称翻砂。数百年来,人们用石英砂作为基本材料,加上粘土做粘结剂,做成砂型。后来,虽然在粘结剂方面有了改进,从物理性的粘结剂发展到化学性的粘结剂,但仍然用砂为基本
门球比赛,不仅是比技术、比战术,也是比心态、比作风,比指挥艺术。球的移动变位,使优劣形势变化在瞬息之间。特别是处于绝对优势情况下,往往一杆的失误或对方打出一杆好球(甚
文中介绍英国James Maude公司的铸铁车间经过几年的努力所采取的改善质量措施。该车间每周生产140~150吨的各种复杂外形的铸件,铸件重量多数为220~1120公斤(有时也达2250公斤)
采用管式连续流动反应器,研究了在电解银催化剂上甲醇氧化为甲醛的动力学,测定了在颗粒状的催化剂上空速为11000时~(-1)、反应温度为520℃和470℃时,反应气体各组份对反应速
大直径深孔油缸的加工是一项比较复杂的技术难关。在生产实践中,我厂三金工车间根据普通车床用浮动镗刀加工深孔油缸的原理,在四米立车上改革了一套简单工具(附图),利用浮动
本人从事门球教练员工作十余年来,感受颇多,尤其感到开好赛前预备会非常重要。现谈一点浅见,供球友们参考。 I am engaged in croaking coaches more than ten years, feel
要充分发挥精密切割新工艺的优越性,在实际操作中,怎样正确地使用这些设备和合理选择工艺规范是个关键。火焰精密切割的工艺规范主要包括切割氧压力、切割速度、预热火焰的