在卧式压铸机上采用锥形浇口的方法是实现模具通用的一种方法。但这种方法尚有不足之处:①压铸件只适用于采用中心锥形浇口。②必须在压铸模上增加一个通用切料装置。③模具若在立、卧式压铸机上交替使用,装拆麻烦、化费时间多。一般只适用于把压铸模从立式压铸机上转移到卧式压铸机上生产。 In the horizontal die-casting machine using conical gate method is to achieve a common mold method. However, this method is still inadequate: ① die casting is only applicable to the center taper gate. ② must die on the die to add a universal cutting device. ③ If the mold legislation, horizontal die-casting machine on the alternate use, assembly and disassembly trouble, spend more time. Generally only applies to the die-casting mold from the vertical die-casting machine transferred to the horizontal die-casting machine production.