【摘 要】
:
Electron probe and X-ray energy spectrum were used to investigate the chemical composition of the interface between material and new bone after porous tricalciu
【机 构】
:
Biomedical Materials and Engineering Center
【基金项目】
:
国家重点基础研究发展计划(973计划)
论文部分内容阅读
Electron probe and X-ray energy spectrum were used to investigate the chemical composition of the interface between material and new bone after porous tricalcium phosphate ceramic implanted in tibia of rabbits. The element changes of the interface, the materials transformation and the situation of new bone formation at different implantation period were observed. The results showed that the carbon element content decreased gradually in new bone tissue, and the content of calcium and phosphor element increased by degrees with the implantation time. At the same time, calcium-phosphor ratio in the new bone kept a higher level. New bone grew into the materials interior, material dispersed and degraded simultaneously. Both composition of materials and new bone tended to be consentient. Finally, the materials were substituted by new bone. After implantation, not only the materials itself dissolved and degraded partially, but also new bone formed on the outer and pore surface of β-TCP porous bioceramics, which showed that the degradation products of lifeless calcium phosphate inorganic materials took part in constituting of new bone tissue.
其他文献
现代施工管理的意义和特点在于要变传统的纵向单因素安全管理为现代的横向综合安全管理;变传统的事故管理为现代的事件分析与隐患管理(变事后型为预防型);变传统的被动的安全
A new method of calcium nitrate and sodium phosphate as reactants was employed to prepare biomimetic apatite nanocrystals by a simple heating treatment in water
晋升是南昌行政事业单位人力资源管理的一项重要激励措施.本文通过研究晋升激励的意义,操作注意,及实践帮助南昌行政事业单位找到留住适宜本单位发展的人员的有效途径.
An ultrasonic evaluation method of echo feature of diffusion bond joint between two dissimilar materials is presented. The echo signal was acquired by an automa
分析并指出了当前农技推广服务工作的重要意义,普遍存在的问题,并提出了五项改进农技服务推广工作的方法.
3 mm thick 400 MPa grade ultrafine grained ferritic steel plates were bead-on-plate welded by CO2 laser with heat input of 120~480 J/mm. The microstructures of t
The effect of a sputtered Ti-48Al-8Cr-2Ag (at. pct) coating on the oxidation resistance of the cast Ti-46.5Al-5Nb (at. pct) alloy was investigated in air at 100
SnSb has attracted a great attention in recent investigations as an anode material for Li ion batteries. The formation energies and electronic properties of the
Methyl methacrylate (MMA) emulsion polymerization in the presence of nanometer calcium carbonate (nano-CaCO3) surface modified with (-methacryloxypropyltrimetho
Magnetic properties were investigated for the rare-earth 3d-transition metal oxides with the perovskite structure. Intriguing magnetic phenomena were reviewed f