目前采用的鎂及其合金的鑄造工艺流程有以下缺点:电能单消高。鋼(用于坩堝)和鑄铁(用于鑄模)消耗大。由于澆鑄时产生大量的热和气体,使运輸带的工作繁重以及成品率不高等。本文闡述了采用連續式水平鑄造方法澆鑄工业純鎂錠的可能性,并确定,連續式水平鑄造机将成为把半成品鑄造工厂的鑄造設备連成 Currently used in magnesium and its alloy casting process has the following disadvantages: single high consumption of electricity. Steel (for crucibles) and cast iron (for molds) are expensive. Due to the casting of a large amount of heat and gas, so that the work of the conveyor belt is heavy and the yield is not high. This article describes the possibility of using a continuous horizontal casting process to cast industrial pure magnesium ingots and determined that a continuous horizontal caster will be a successor of the foundry equipment for the semi-