论文部分内容阅读
我县地处洞庭湖畔,地基属湖洲多年沉积土,为避免地基不均匀沉降的不利影响,我局三栋楼房共设置墙身圈梁8道。为加快进度、节约木材,我们设计了一套硬质纤维板模板、角钢夹具的圈梁模板,简化了制作和装拆工序。使用这种模板,每天可装模浇捣一道圈梁。用1000×2000×4mm的硬质纤维板和35×45mn木枋制作模板,用40×4角钢制作夹具,在夹具角部点焊φ6钢筋并钻有φ4孔。将圈梁钢筋在砌体上绑扎成型,从一端墙角开始装模。若模板长度不配套,可将缺
My county is located on the banks of the Dongting Lake, and the foundation is a sedimentary soil for many years. To avoid the adverse effects of uneven settlement of the foundation, the three buildings of the Office have a total of 8 wall beams. In order to speed up the progress and save wood, we designed a hard-fiber board template and angle beam template for angle steel fixtures, simplifying the production and assembly processes. Use this template to cast a ring of girders every day. Manufacture a template with 1000×2000×4mm hard fiberboard and 35×45mn wooden rasps, use 40×4 angle steel to make clamps, spot weld φ6 steel bars at the corners of the fixture and drill φ4 holes. The band beam reinforcement is formed on the masonry and the mold is installed from one end of the corner. If the length of the template is not matched, it can be lacking