该轧机自1947年投产以来,几经改进,其操作性能和产品质量得到很大提高。最近星崎厂又对该轧机进行了一次改进,从而实现了连续作业,使布劳克轧机的特性得到充分发挥,作为高级钢丝专用轧机,已于1980年投入生产。坯料为145毫米~2×7500毫米(长)×1.2吨(最大)的不锈钢连铸方坯,采用 WH 式步 Since the mill was put into operation in 1947, its operation performance and product quality have been greatly improved after several improvements. Recently, Hasegagasaki made a further improvement on this rolling mill to realize continuous operation and give full play to the characteristics of the Bratton rolling mill. As a special rolling mill for advanced steel wire, it was put into production in 1980. The billets are stainless steel continuous casting billets of 145 mm to 2 × 7500 mm (length) × 1.2 ton (maximum), adopting the WH type step