目前,对于内孔表面光洁度要求较高的管子,往往采用衍磨和研磨的方法进行精加工。这种加工方法,效率低;设备条件较差的单位也无法采用这种加工方法。随着电化学加工在工业生产中的应用越来越广泛,管子的这种精加工问题也随之容易解决一些了,现介绍一下电化学加工1Cr18Ni9Ti管子的方法一、电解液配方及工艺参数(一)溶液配方(重量比) At present, the pipe with high requirement on the surface finish of the inner hole is often finished by means of grinding and grinding. This method of processing is inefficient; units with poor equipment can not use this method of processing. With the electrochemical processing more widely used in industrial production, pipe finishing problems will also be easy to solve some of these, are introduced electrochemical processing 1Cr18Ni9Ti pipe method, the electrolyte formulation and process parameters ( A) solution formula (weight ratio)