锻造大件时最困难的操作之一是工件的翻转。尤其像我们这祥机械化程度很差的车间里,显的更为突出。特别是从我厂生产各种锻锤以来,重型锻件更加增多,拿锤头锻坯采说,重量都在一吨以上,这样大的锻件要在锤上辗转翻打,更增加了操作上的困准。但由于工友思想不断的提高,破除迷信,敢想敢干,终于在五吨锤上改迸了大件翻转的操作。原先是以人工抱钳翻转工件的,需8～10个工人才 One of the most difficult operations when forging large parts is the turning of the work piece. In particular, as we have a very poor mechanization of the workshop, the more prominent. In particular, since the production of various forging hammer from our plant, heavy forgings more increased, take the hammer forging billet mining said that the weight is more than a ton, so forgivable forging on the hammer, but also increased the operation Sleepy. However, due to the continuous improvement of the workers’ thinking, breaking superstitions and daring to do it, the operation of large-scale overturning has finally been transformed into a five-ton hammer. The original is to manually flip the workpiece pliers, need 8 to 10 workers only