轮胎的正确使用,一般应注意以下几方面:起步平稳无论是空车还是重车,在起步时,一定要缓抬离合器,避免轮胎打滑。车辆上坡时,应根据发动机动力情况,及时变换档位,千万不要待车辆无力停下来后才重新起步。慎用制动个别驾驶员平时喜欢开快车,经常使用紧急制动,易造成轮胎磨损。应尽量保持汽车在路面直线行驶,避免车辆“蛇行”。装载货物时,要合理装载,防止局部超载。坏路缓行车辆通过不平路面时,要降低车速,选择平路,缓行通过,遇到较大凹坑时,一定要紧握方向盘,减速行驶,以免因单胎超载而引起轮胎爆破:当通过翻浆路面,工地、货场时,除注意机械作业运行情况外,还应注意避免辗压路面的尖石、锐物、铁器,以及工厂热灰碴、化学药物和油脂等物:通过泥泞路面时,不要使用制动,避免滑移,若已打滑,应下车排除车轮两侧泥浆、铺垫树枝杂草,不可猛轰油门使轮胎越陷越深,导致胎面与胎侧剧烈摩擦。定期换位轮胎使用一段时间后,必须定期 The proper use of the tire should generally pay attention to the following aspects: a smooth start Whether it is empty or heavy car, at the start, we must gently lift the clutch to avoid tire slippage. Vehicles uphill, should be based on engine power conditions, timely shift stalls, do not wait until the vehicle unable to stop before restarting. Be careful with braking Individual drivers usually like to drive fast, often using emergency braking, easy to cause tire wear. Should try to keep the car driving on the road straight, to avoid vehicles “snake ”. When loading the goods, it should be properly loaded to prevent partial overloading. Slow road slow vehicles through uneven road, to reduce the speed, select flat road, slow through, in case of larger pits, be sure to grip the steering wheel, slow down, so as to avoid single-tire overload caused by the tire blasting: Pavement, construction sites, freight yard, in addition to pay attention to the operation of mechanical operations, but also to avoid the rolling road spikes, sharps, ironworks, and factory thermal ballast, chemicals and grease and other objects: through the muddy road, do not Use the brake to avoid slippage, if slippery, should get rid of the mud on both sides of the road wheels, bedding tree branches weeds, can not be fierce throttle deeper and deeper tires, resulting in dramatic friction between the tread and sidewall. Regular transposition of the tire after use for some time, must be regular