新型辉光放电渗铝源高原，贺志勇，徐重（太原工业大学表面工程研究所）１前言传统的离子渗铝方法是将铝放入石墨坩锅内作为供给源。因渗铝温度高于铝的熔点（约６６０℃）．铝呈液态。从而坩锅的摆放位置受到限制，且由于渗铝时铝液处于沸腾状态，试样与铝液距离较近时，... New Glow Discharge Aluminizing Source Plateau, He Zhiyong, Xu Zhong (Surface Engineering Institute, Taiyuan University of Technology) 1 Introduction The traditional ion aluminizing method is to place aluminum into the graphite crucible as the source of supply. Due to aluminizing temperature is higher than the melting point of aluminum (about 660 ℃). Aluminum is liquid. As a result, the placing position of the crucible is limited, and when the aluminum liquid is in a boiling state when aluminizing, the distance between the sample and the aluminum liquid is relatively ...