论文部分内容阅读
目前胶带接头的方法有机械连接和硫化胶接两种,由于机械连接的接头强度与胶带本身强度的比值(即所谓接头强度效率)只有25～60％,因此其接头强度低、寿命短,不适用于长距离、高强度的胶带输送机;而硫化胶接的接头强度效率达60～95％,其接头强度较高、寿命较长,对输送机的运行性能也较好,因此硫化胶接正取代机械连接而迅速发展。目前国内胶带接头大多数是由用户在现场进行胶接,
At present, there are two methods for the tape joint: mechanical connection and vulcanized adhesive bonding. Since the ratio of the strength of the mechanical connection to the strength of the adhesive tape (the so-called connector strength efficiency) is only 25-60%, the strength of the connector is low and the service life is short. For long-distance, high-strength conveyor belt; and vulcanized joints of the connector strength and efficiency of 60 to 95%, the connector strength is higher, longer life, the conveyor running performance is better, so vulcanized adhesive Is replacing the mechanical connection and rapid development. At present, most of the domestic tape joints by the user in the field of adhesive,