材料饮料瓶、剪刀、针、尼龙线、胶布制作1.选取瓶身有棱的饮料瓶,将有棱部分的瓶身剪下约5厘米左右长的一段,把胶布裹在剪切处,以免剪好后毛糙的边会划伤手。2.用针在瓶身每条棱的中点上扎1个小孔(选取瓶子的时候要选择有6个棱的瓶子)。3.扎完孔后,以图二所示的方法把尼龙线穿 Material beverage bottles, scissors, needles, nylon thread, tape production 1. Select the bottle edge of the beverage bottle, the edge of the bottle body cut about 5 cm long section, the tape wrapped in shear, so as not to After cutting the rough edges will scratch the hand. 2. Use needles to stick a hole in the midpoint of each rib of the bottle (choose 6 bottles when choosing the bottle). 3. After completing the hole, use the method shown in Figure 2 to thread the nylon thread