本文系苏联专家谢捷尔尼柯夫同志，根据各厂的实际情况而编写的关于造型、熔铸等工艺规程的编制方法及其车间、工段、工人工作职责等等。目前各厂在这方面尚缺乏经验，大家都在摸索。因而，工作细则、工作次序等也不够健全与合理。为使此项工作日趋合理、完善。特将这份材料发表于下；供各厂在实际工作中，结合本单位具体情况学习、应用。加在试行过程中遇有困难时请随时寄函编辑部，以便请教专家设法解决。本文因篇幅所限，故拟分作两期发表。 This article is the Soviet Union expert Comrade Xie Tiernike Kofu, according to the actual situation of the plant prepared on molding, casting and other preparation of procedures and methods of workshop, section, the job responsibilities of workers and so on. At present, each plant is still lack of experience in this area, and everyone is groping. Therefore, the work rules, work order, etc. are not sound enough and reasonable. To make this work more and more reasonable and perfect. This material will be especially published in the next; for the plant in the actual work, combined with the specific circumstances of the unit to learn and apply. If you encounter any difficulties during the pilot process, please write to the editorial department at any time so that experts can try to solve the problems. This article due to space limitations, it is intended to be divided into two issues.