论文部分内容阅读
石油一厂东原油车间在技术革新和技术革命运动中,青年超英赶美小组在老工人冉繁文的带动下,大胆地提出了将现有加热炉改成燃烧炉的建议。由于党组织的积极支持,战胜了部分同志怕加热炉爆炸等等论调,在二部炉进行了生产试验,经过两个多月的生产运转证明,不但加热炉没有爆炸,而且使加热温度烧不上来的问题解决了,加热温度由550℃提高到650℃左右,充分保证了干馏所需要的热量。加热炉改燃烧炉的流程如下图所示。将循环瓦斯道灌满水,瓦斯与空气入加热炉燃烧后,与凉瓦斯混对,调节到一定温度后送
In the process of technological innovation and technological revolution, the first crude oil workshop in the first oil plant, driven by the old worker Ran Fan-wen, boldly proposed to change the existing heating furnace into a combustion furnace. Due to the active support of the party organizations, it defeated some comrades who were afraid of blast furnace explosion and so on. They conducted production tests in the two furnaces and after more than two months of production and operation proved that not only the furnace did not explode but also the heating temperature did not burn Up to solve the problem, the heating temperature increased from 550 ℃ to 650 ℃, fully guaranteed the heat required for dry distillation. Heating furnace to change the process of burning furnace as shown below. The cycle of gas Road filled with water, gas and air into the furnace after burning, mixed with the cool gas, adjust to a certain temperature after evacuation