论文部分内容阅读
乌克兰顿涅茨第一汽车修理厂在连杆修理线上,建立了专业化的工位,设有重新装备的全属切削机床和工艺装置。加工连杆和连杆盖用的夹具(供安装、定位、紧固和固定在机床上)包括底板1(图1)。底板1的磨削面上装有专用虎钳2,由两个夹紧手把6紧固。连杆3和连杆盖4从上面经过,装料口有次序地放入虎钳,使结合面支承在底板凹槽上(连杆与连杆盖成套装夹)。用夹紧丝杠5把两个连杆和两个连杆盖(一套)固定在虎钳上。
Ukraine Donets first car repair shop in the connecting rod repair line, the establishment of a specialized station, with a fully equipped cutting machine and process equipment. The jig for machining the connecting rod and connecting rod cover (for installation, positioning, fastening and fixing on the machine) includes the base plate 1 (FIG. 1). A special vise 2 is mounted on the grinding surface of the base plate 1 and fastened by two clamping handles 6. The connecting rod 3 and the connecting rod cover 4 pass through from above, and the loading opening is put into the vice in an order, so that the connecting surface is supported on the groove of the bottom plate (the connecting rod and the connecting rod cover are sheathed together). Fix the two connecting rods and two connecting rod caps (one set) with the clamping screw 5 on the vise.