论文部分内容阅读
直接与生产线相连的清洗系统能在发动机制造中提供清洁的零件,这样能减少返工和废品。该清洗系统能用于清洗质量达365kg的固定用途和乘用车辆柴油机的机体。 1多次清洗的必要性工业用柴油机由于负荷高,因此制造公差比轿车发动机更严。如载重汽车发动机必须保证持续运转50万KM。为了消除铸件应力,灰铸铁机体在加工前必须在露天中存放几周,在制造过程中由于夏、冬温差的影响,调整刀具时必须考虑此点。当然,清洁度的要求也特别高。
Cleaning systems connected directly to the production line provide clean parts in engine manufacturing, which reduces rework and scrap. The cleaning system can be used to clean mass up to 365kg for fixed-use and passenger car diesel engine body. 1 The necessity of multiple cleaning Industrial diesel engines due to high load, so manufacturing tolerances more stringent than the car engine. Such as truck engines must ensure continuous operation 500000 KM. In order to eliminate the stress of castings, the gray cast iron body must be stored in the open air for several weeks before processing. Due to the influence of the temperature difference between summer and winter, this point must be taken into account when adjusting the tool. Of course, the cleanliness requirements are particularly high.