论文部分内容阅读
我省现有各种气瓶约20万只,气瓶制造厂家7个、气体充装单位近200家,其中充装液化气体、溶解乙炔气体的单位约70余家,充装单位大部分为气瓶检验单位。自1979年原国家劳动总局颁发《气瓶安全监察规程》以来,我省气瓶设计、制造、充装、检验等环节的安全管理工作经过整顿取得了一定的成效。迄今,气瓶设计、制造基本走入制度化、正规化的轨道。但是,由于气瓶使用极其广泛,有的使用环境较差,加之一些单位忽视气瓶安全管理,事故时有发生,尤以气瓶充装检验的问题更为突出,气瓶充装、检验不当发生事故占气瓶总事故数的67%,其主要原因是气瓶充装、检验的
There are about 200,000 kinds of gas cylinders, 7 gas cylinder manufacturers and nearly 200 gas filling units in our province, of which about 70 are filled with liquefied gas and acetylene gas, most of which are Cylinder inspection unit. Since 1979, the former General Administration of Labor issued “Regulations on Cylinder Safety Supervision”, our province cylinder design, manufacture, filling, testing and other aspects of safety management has achieved some success through rectification. So far, the design and manufacture of gas cylinders have basically entered the institutionalized and regularized track. However, due to the extremely wide use of cylinders and the poor environment for their use, and some units ignoring the safety management of cylinders, accidents have occurred occasionally. In particular, the problem of cylinder filling inspection has become more conspicuous. Cylinders are filled and not properly tested Accidents accounted for 67% of the total number of cylinders accident, the main reason is the cylinder filling, inspection