论文部分内容阅读
目前,由于安装队伍素质较差,室内供暖工程在施工上普遍存在着一些质量通病,本文针对其中最常见的五个问題作出分析并提出防治措施。一、质量通病存在的原因及防治 1.(?)、支管坡度不适合室内供暖(?)管坡度不合适的主要原因,一是施工中管子没调直和在堵管道穿墙洞时没有很好地注意管道坡度,(?)是管道支架位置和标高控制不好,支架间距和标高偏差过大,从而使管道局部下凹或起
At present, due to the poor quality of the installation team, there are common quality problems in the construction of indoor heating projects. This article analyzes the five most common problems and proposes preventive measures. First, the quality of the common reasons for the existence of disease and prevention 1. (?), branch slope is not suitable for indoor heating (?) The main reason is not suitable for the slope, first, the pipe was not straightened during construction and blocking the pipeline through the hole is not very Pay attention to the slope of the pipeline, (?) is the poor control of the position and elevation of the pipe support, the deviation of the bracket spacing and elevation is too large, so that the pipe is partially concave or