论文部分内容阅读
盆景山石的胶合剂有水泥、环氧树脂等。盆景多采用水泥,并且水泥的标号越高越好。如有人用工业废煤渣作微型盆景,用灰水泥作为胶合剂即可。一、山石在胶接前,先要把石料依所要形成的景观进行搭配、布局,把石料胺接处刷净,用水冲湿,再用备好的胶合剂进行胶接。二、一般来说,胶接缝线越隐蔽越好。为了接近天然,胶合泥未干时可在接缝处涂撒本石料的石屑。三、胶合后,先用其他的支撑物给予辅助。环氧树脂等在24小时可凝固硬结,水泥夏季半天、冬季一两天后可搬动。四、水泥胶合后的三小时至四小时,可用小刀、锯条轻轻刮掉多余或污染石身的水泥,并在接缝处
Bonsai rocks stone cement, epoxy resin and so on. Bonsai use more cement, and the higher the better the cement label. If you use industrial waste cinder for miniature bonsai, ash cement can be used as a glue. First, the rock before the glue, the first stone to be formed by the landscape to be with the layout, the stone amine access at the brush net, water red wet, and then prepared glue for gluing. Second, in general, the more concealed glue seams the better. In order to be close to the natural, when the glue is dry, seagrass can be sprinkled on the seams. Third, after gluing, first with other support to give assistance. Epoxy resin can be solidified in 24 hours induration, cement half a day in summer, one or two days after the moveable. Fourth, cement glued three hours to four hours, available knife, saw blade gently scraping away excess or contaminated stone cement, and at the seams