在复杂的无线电电子设备中,导线捆扎后,常采用不同色彩的导线来区分,但因导线的色彩是有限的,难免重复.如果在一束线扎中出现数根相同颜色的导线,这样对装配、检修都会带来困难.我们认为,在导线首尾二端标上设计总装接线图上导线的序号以区分导线,是最为理想的方法. 聚氯乙烯导线上标字可按下列步骤进行: (1)根据导线粗细,确定所需字样及大小,预先刻 In complex radio and electronic equipment, the wire bundled, often using different colors of wire to distinguish, but because of the color of the wire is limited, it is inevitable to repeat.If a bunch of wire appear in the same number of wires of the same color, so that Assembly and maintenance will be difficult.We believe that the end of both ends of the wire marked with the design of the wiring diagram of the assembly wiring diagram to distinguish the wire is the most ideal method.PVC wire on the word can be carried out according to the following steps: 1) According to the thickness of wire, determine the required words and size, pre-engraved