我们根据扭簧测微计工作台三支点的位置关系,推算出一种工作台快速调平的方法。采用此法可在五分钟内调平工作台(工作台与φ8平面测帽的平行度≤0.5μm)。如图1所示,在测杆上装上φ8平面测帽,将工作台上放置的4～10mm 4等量块接触测帽测量面的1/2,此时指针对准分度盘上任一刻线,依次将量块同一位置相对于测帽测量面 According to the position of the three fulcrums of the torsion spring micrometer table, a method of leveling the worktable quickly is deduced. Using this method can be adjusted within five minutes workbench (table and φ8 flat cap measuring the parallelism ≤ 0.5μm). As shown in Figure 1, the measuring rod mounted φ8 plane cap, the table placed 4 ~ 10mm 4 equal measuring block measuring cap measuring surface 1/2, then the pointer on the index plate any engraved line , Followed by the same position of the measuring block relative to the measuring cap measuring surface