斜楔夹紧方便钻模如图1,它主要有两块带有倾斜6°的钻模脚5,钻套管2,钻模板4,定位钉3和6°夹紧斜楔6组成。工件用内孔或工艺孔以及外圆和外形来定位(图2)。装夹时,工件定位后插入斜楔轻轻一敲就能方便快速地夹紧和松开。此钻模具有结构简单,装卸快速方便的特点。用斜楔代替普通压板使压紧接触 Oscillating wedge clamping convenient die as shown in Figure 1, it mainly has two with a tilt 6 ° drilling die 5, drill pipe 2, drilling template 4, positioning pin 3 and 6 ° clamping wedge 6 composition. Workpieces are bored with holes or holes as well as the outer circle and contour (Figure 2). Clamping, the workpiece positioning after the wedge into a wedge can easily and quickly clamp and release. This drilling has a simple structure, loading and unloading fast and convenient features. Use a wedge instead of an ordinary platen to press the contact