论文部分内容阅读
通用电子联合公司制造的可编程序激光非接触测量系统为测量石膏墙板的宽度和厚度提供了精确的测量手段,该系统可确保制做过程中的最佳公差和质量控制。在线质量控制系统提供了精确的在线测量手段,其对出挤压机干燥前的湿软石膏板的测量精度小于±0.2毫米,除进行公差控制外,干燥器前测量系统还能用于信号自动分类系统。石膏板在制做过程中其板宽的尺寸用划线刀调整,质量不能保证,误差过大。使用激光系统后,一俟板宽超出允许公差范围,操作人员就能立
The programmable laser non-contact measurement system manufactured by General Electric Corp. provides an accurate measurement of the width and thickness of gypsum wallboard to ensure optimum tolerances and quality control during manufacture. The online quality control system provides accurate on-line measurements that measure less than ± 0.2 mm of wet-plaster board pre-drying out of the extruder. In addition to tolerance control, the pre-desorber measurement system can be used for automatic signal Classification system. Gypsum board in the process of making the width of its board size with scribing knife adjustment, the quality can not be guaranteed, the error is too large. After using the laser system, the operator is able to stand one sheet across the allowable tolerance