论文部分内容阅读
In order to study the distribution of equivalent and shear strain of aluminum alloy plate during snake hot rolling,several coupled thermo-mechanical finite element models (FEM) are established.Effects of speed ratio and offset distance on strain distribution of the plate are analyzed.The length of cross shear zone is defined to have a better understanding of the deformation characteristic in cross shear zone,which is the essential difference from symmetrical rolling in deformation zone.The results show that the equivalent strain and shear strain of lower part both increase with the increase of speed ratio,while the upper part decreases;the equivalent strain through the whole thickness decreases with ascending offset distance,while the shear strain of lower part increases.The length of cross shear zone quickly increases with ascending speed ratio and slightly decreases with ascending offset distance.The positive and negative cross shear zones are formed with the increase of speed ratio and offset distance,respectively.The value of the sensitivity coefficient of speed ratio is an order of magnitude bigger than the offset distance.However,the shear strain at center point increases with the ascending speed ratio and offset distance for different mechanism.As speed ratio increases,the asymmetry of the distribution of equivalent is becoming larger and the shear strain is generated in the same direction in cross shear zone.The FEM results agree well with experimental results.