论文部分内容阅读
XH-60型油压式钻机在我们煤田勘探部门第一次使用。机器构造较为复杂，维护、保养的要求也严格。在设备安装以及技术操作上与手把式钻机不同。下边介绍一下此型钻机在安装施工中和开动后所遇到的问题与解决方法。1.场内布置：XH-60型油压式钻机配的是17—18公尺的钻塔和长12公尺的场房。在场内布置方面因为钻机和水泵是各有一台柴油机单独带动组成的机组，安装方法和相互位置与旧有的钻机不同，我们是按图1方式布置的。
The XH-60 hydraulic rig was used for the first time in our coal field exploration department. The structure of the machine is relatively complex, and the requirements for maintenance and maintenance are also strict. In equipment installation and technical operation, it is different from handle rigs. The following describes the problems encountered during the installation and construction of this type of drilling rig and the problems encountered and solutions. 1. Place layout: The XH-60 hydraulic rig is equipped with a 17-18-meter rig and a 12-meter-long farm. In the field layout, because the drilling rig and the water pump are units that each have a separate diesel engine, the installation method and the mutual location are different from those of the old rig. We are laying out as shown in Figure 1.