退火温度对汽车用Fe-Cr-Mo合金组织及阻尼性能的影响

来源 :铸造技术 | 被引量 : 0次 | 上传用户:gyf1978
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
以高阻尼汽车用Fe-Cr-Mo合金为对象,研究了不同退火温度对其组织和阻尼性能的影响规律。结果表明,随着磁场强度的增加,合金的磁致伸缩系数先增加然后趋于稳定;当退火温度为900℃,合金的磁致伸缩系数最高;随着退火温度的升高,合金的损耗因子先增加后降低,在退火温度为900℃时取得最大值;合金经充分的退火后,饱和磁致伸缩系数与最大阻尼值成正比关系。 The effect of different annealing temperature on the microstructure and damping properties of Fe-Cr-Mo alloy with high damping is studied. The results show that the magnetostriction coefficient firstly increases and then tends to be stable with the increase of the magnetic field strength. When the annealing temperature is 900 ℃, the magnetostriction coefficient of the alloy is the highest. With the increase of the annealing temperature, the loss factor After the first increase and then decrease, the maximum value is obtained when the annealing temperature is 900 ℃. After sufficient annealing, the saturation magnetostriction coefficient is proportional to the maximum damping value.
其他文献
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
期刊
对于反应堆堆芯而言,其在具体的实践中,会涉及很多方面的因素,比如热工水力、反应堆物理等内容.基于这些情况,一方面可以说,热工水力参数会受到一些因素的影响,这些因素可能
盲人引路将不再困难.科学家们正在发明一种仪器:用舌头舔一下电极、把视觉信号传送给大脑、从而能容易地辨别方向.它的发明者希望将来该仪器可以使盲人出外旅行更加方便rn
在全国陆地2.2万公里的边境线上,民族自治地方就占1.9万公里。全国边境县有135个,民族自治地方占107个。其中,有30多个少数民族与境外同一民族相邻而居,民族风情独特,且拥有
盒形零件成形一直是冲压成形工艺的难点。以矩形防火罩为案例,对盒形零件使用多工位成形模中出现的条料定位及步距控制、成形兼整形、自动卸料等问题进行了研究。根据防火罩
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
期刊
《岁月》所展现的与其说是一幅幅饱经沧桑、形态各异、身世有别、遭遇不同的老农民肖像,勿宁说是100多年来中国农村社会变迁的缩影,具有历史学、社会学和人类学的重要参考价
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
期刊