论文部分内容阅读
德州仪器公司推出新的光学无线技术
【机 构】
:
中国科学院上海光学精密机械研究所,上海201800
【出 处】
:
激光与光电子学进展
【发表日期】
:
2002年39期
其他文献
利用射频激励电容耦合等离子体放电装置产生等离子体,分别采用氧、空气、氩、氖等离子体对Ta2O5/Al2O3激光陀螺反射镜进行处理,试验研究了等离子体气压和等离子体种类对Ta2O5/Al2O3激光陀螺反射镜光学损耗的影响。通过比对实验、能谱、光电子能谱分析测试等技术手段,对Ta2O5/Al2O3激光陀螺反射镜在等离子体环境下出现的损耗变化现象、机理进行了探讨。Ta2O5/Al2O3激光陀螺反射镜经氧等离子体处理后的损耗变化量最大,达到了15 ppm(1 ppm=1×10-6),为另3种等离子体处理后损耗变化
The electronic and optical properties, including band structure, density of states (DOS), absorption rate, refractive index, and dielectric function, of anatase TiO2 codoped with N and first transition elements are investigated using the plane wave pseudo
Single-longitudinal-mode, narrow-linewidth oscillation from a high-Q photonic-electronic hybrid cavi
We propose a high-Q photonic-electronic hybrid cavity for single-longitudinal-mode na
本文设计了一种新型的偏振棱镜系统,它具有损耗小、隔离度高、结构紧凑、调试方便等诸多优点。该偏振棱镜系统的损耗为0.6 dB,隔离度为24 dB。以此为基础做成的光纤环形器指标为,波长在1.3 μm时,插入损耗(包括光纤对接损耗):2.2~2.4 dB,隔离度:20.5~23.1 dB。
提出了一种基于底部反射增强的GaAs纳米线径向p-i-n结阵列的太阳能电池,利用有限差分时域法和有限元方法对其光谱吸收和光伏性能进行了研究。结果表明,将聚合物和衬底之间的SiO2替换为低折射率的MgF2介质层,不仅显著降低了衬底的吸收损耗,还显著提高了纳米线阵列在整个波长范围内对光的吸收率。此外,通过优化i区厚度和纳米线长度,可将太阳能电池的光电转换效率提升至13.9%。该研究为实现低成本、高性能的纳米太阳能电池提供了一条可行途径。
Ultrafast Laser Fabrication of Novel Fiber Mach-Zehnder Interferometer Sensors and Its Cost-Effectiv
用KTP晶体研制成LD泵浦的YAG腔内倍频激光器,得到0.532 μm连续绿色线偏振激光输出,阈值泵浦功率为41 mW,输出功率为1.4 mW,斜效率为1.7%。研究了泵浦光对倍频激光横模的影响。
Stable dual-wavelength erbium-doped fiber laser using novel fabricated side-polished arc-shaped fibe
A dual-wavelength fiber laser operating at the 1550 nm region using a side-polished arc-shaped fiber with deposited ZnO nanoparticles is proposed and demonstrated. The arc-polished fiber is fabricated by using a simple but novel approach in which a silico