论文部分内容阅读
我厂采用的全焊五加仑方桶,质量要求较高。最初用手工焊接,劳动强度大,生产效率低。1970年参照天津石油站的焊桶机,自制了一台焊桶机。由于机械结构和传动装置比较复杂,容易出事故(机械故障和大量挤坏桶现象),操作人员始终处于高度紧张状态,加之机器的噪声大,柴油喷火加热严重污染环境,有损于操作人员的身体,故我车间决定改造这种焊桶机。 1978年8月开始,在学习外地经验的基础上,自行设计和制造,仅用了三个月的时间,新的五加仑方桶自动焊桶机就诞生了。经过八个多月的调试,现在已正式投入使用。
All-welded five gallon barrels used by our factory have higher quality requirements. The first manual welding, labor-intensive, low productivity. In 1970, referring to the welding machine of Tianjin Petrol Station, a welding machine was made. Due to the complicated mechanical structure and transmission, easy to accident (mechanical failure and a large number of crowded bad barrel), the operator is always in a state of high tension, coupled with the noise of the machine, diesel spray heating seriously polluting the environment, detriment to the operator The body, so my workshop decided to transform this welding barrel machine. Starting from August 1978, on the basis of learning field experience, it took only three months to design and manufacture a new five-gallon square barrel automatic welding machine. After more than eight months of commissioning, it has now officially put into use.