有一次,我的摩托车变速箱外壳被破损的离合器零件击穿,机油全漏光。在无法买新件的情况下,我试着用玻璃强力胶来修补漏洞。先将箱内油垢及外壳漏洞处油污用洗衣粉彻底洗净,干燥后,把预先按比例调好的强力胶涂在漏洞处,再贴上薄的金属片。把其置于常温下固化24小时。然后装入机油即行试车,效果很好,箱壳滴油不漏。 我还用玻璃强力胶修补过化油器,用来固定过灯座,甚至修补过蓄电池,效果都不错。 Once, my motorcycle transmission case was damaged by broken clutch parts, oil leakage. In case I can not buy a new one, I try to fix the loophole with glass glue. The first grease box and the housing leaks at the oil stains thoroughly washed with detergent, after drying, the proportion of good pre-adjusted glue coated in the loopholes, and then paste the thin metal sheet. Cure it for 24 hours at room temperature. Then loaded into the oil that line test, the effect is good, the case does not leak oil drip. I also use glass glue to repair the carburetor, used to fix the lamp holder, and even repair the battery, the effect is good.