苏修某厂设计了一种在160吨压床上使用的闸板式自动进料弯曲模。 弯曲模的工作步骤如下:在料箱1里垛放着整叠毛料。当滑块下行时推杆2就按压摇臂3并使轴4转动。此时,摇臂5通过拉杆6迫使闸板7移到原始位置。当滑块上行,弹簧8通过摇臂3和9使轴4反转并移动闸枝7,闸板7就从料箱中推 Su Xiu a plant designed a 160-ton press on the use of gate-type automatic feed bending mode. Bending mold work steps are as follows: In the magazine 1 in the pile stack of wool. When the slider goes down, the push rod 2 presses the rocker arm 3 and rotates the shaft 4. At this moment, the rocker arm 5 forces the shutter 7 to the original position by the pulling rod 6. When the slider goes up, the spring 8 reverses the shaft 4 by the rocker arms 3 and 9 and moves the shutter 7, and the shutter 7 pushes from the magazine