论文部分内容阅读
这种外圆锥测量装置,是在一个专用套4的圆壁上制作一对配合用的通孔,在孔中装置一个测微仪1,套端到配合孔轴线的距离L和套的内径D对于所给定的测量范围是一个定值。在测量装置的调整中,首先装上测微仪1,把加长的锥形固定端3和锥形测量端2装到测微仪上,而后将专用套4套装到被测零件5上,微微摆动,消除它们之间的歪斜。随后再将锥形固定端3插入套的右配合孔,
This outer cone measuring device, is a dedicated sleeve 4 on the round wall with a pair of mating through-hole, the hole in the device with a micrometer 1, the sleeve end to the hole axis distance L and the sleeve diameter D For a given measurement range is a fixed value. In the adjustment of the measuring device, first install the micrometer 1, install the extended conical fixed end 3 and the conical measuring end 2 on the micrometer, and then install the special sleeve 4 on the measured part 5, Swing to eliminate skew between them. Then the conical fixed end 3 is inserted into the right mating hole of the sleeve,