如图所示的防振支架用于重型设备防振,一般重型设备运转时,垂直振动和载荷的量超过了水平振动和侧向力。 防振支架的底座1上有双重锥度,亮体7支撑在圆截面弹性垫圈4和6上,腔5在压力下通过槽2填满工作介质。可以把弹簧垫圈做成中空的,孔通向腔5。在拉紧螺栓3装配支架时,为了在侧 The vibration-proof bracket shown in the figure is used for the anti-vibration of heavy equipment. In the operation of heavy equipment in general, the amount of vertical vibration and load exceeds the horizontal vibration and lateral force. The pedestal 1 of the anti-vibration mount has a double taper. The bright body 7 is supported on the circular cross-section elastic washers 4 and 6. The cavity 5 fills the working medium through the groove 2 under pressure. The spring washer can be made hollow and the hole opens into the chamber 5. When tightening the bolt 3 assembly bracket, to be on the side