蓄水池或地下工程有时漏水相当严重,因水压大,形似“小喷泉”。要堵住十分不容易。如按下面方法处理,既简便又可行。第一步:找准漏水的出口处。第二步:成孔状冒水,可采用尖錾;成裂纹状,可采用扁錾;对准漏水处,用小锤向内钉。孔缝不要扩大,以錾头大小或厚度为准,孔深50毫米左右,能深更好。第三步:用棉花或旧布搓成小团,用旧錾将小团顶入孔内,一次 Reservoirs or underground works are sometimes severely leaky because of the large water pressure, which resembles a “small fountain”. It is not easy to block. It is easy and feasible to handle it as follows. The first step: identify the leaking outlet. The second step: forming a hole-like water, can use sharp rake; into a crack, can be used flat boring; align the leak, with a hammer to nail inward. Don’t enlarge the hole gap. The size or thickness of the hammerhead will prevail. The hole depth will be about 50mm. Step 3: Use cotton or old cloth to make small groups, and use old ones to put small groups into the holes, once