论文部分内容阅读
本文作者已研制丁一种高生产率的自动调节系统,这里对该系统的外貌及工作性能作了描述。这个装置包括自动调节系统(SAM)的检测仪,研磨机,缺陷位置测定仪和计算机。轧件螺旋形地通过SAM检测头,馈送到研磨机。轧件的位置及旋转角度始终由位置传感器监视着,测出的裂纹深度及它所在的部位存储在计算机內。当轧件的缺陷部分处在磨轮之下时,通过由计算机发出的研磨指令,磨轮精确地磨去缺陷区域。SAM的检测与研磨机的研磨可在同一轧件上同时进行,但两者互不干扰。自动调节装置的研磨轮也有所进展,它行40公斤/小时的高切削量且有较高的研磨率。本装置有40—60P/小时的功率。
The author of this paper has developed a high-productivity automatic adjustment system. The appearance and working performance of the system are described here. This device includes a detector, grinder, defect location tester, and computer for the automatic adjustment system (SAM). The rolling stock passes the SAM sensor head spirally and is fed to the grinder. The position and angle of the rolling stock are always monitored by the position sensor and the measured depth of the crack and its location are stored in the computer. When the defective part of the rolling stock is under the grinding wheel, the grinding wheel precisely ablates the defective area by a grinding command issued by the computer. The testing of the SAM and the grinding of the grinding machine can be carried out simultaneously on the same rolling stock, but the two do not interfere with each other. The grinding wheel of the automatic adjustment device has also progressed. It has a high cutting rate of 40 kg / h and a high grinding rate. The device has 40-60P / hour power.