论文部分内容阅读
目前,一五九厂测试组在天线校准测试中采用的弹体方位轴悬挂架仍是20多年前的地面设备配套悬线挂架。这种悬线挂架占用空间位置大,而且要分别摆放在导弹前后方各一个。在对准弹标点时需移动悬线架要反复敲打才能对准,这样费时费工很不方便。在保征质量的前提下,为简化测试手段,提高工作效率,对悬线挂架很有改进的必要。工人操作手崔文杰、郭金胜等同志根据自己经验并参考其它先进经验制作了一个悬线挂架,其原理与原悬线挂架一致,即以弹上前后两标点为准使悬线经重锤对准。改革后的悬线挂架其方式为:在后弹身垂直安定面前整流罩部位,借用了3个螺钉孔固
At present, the azimuth axis suspension frame used by the 159th Test Group in the antenna calibration test is still more than 20 years ago. This suspended line rack occupy space position, but also to be placed in front of the missile each one. In the alignment of the punctuation point need to move the bobbin to beat repeatedly to align, so time-consuming work is very inconvenient. On the premise of preserving the quality, in order to simplify the test means and improve the work efficiency, it is necessary to improve the suspension line hanger. Based on their own experience and other advanced experiences, commanders Cui Wenjie and Guo Jinsheng made a hanging line hanger. The principle is the same as that of the original hanging line hanger, that is, quasi. Remanufactured suspension line rack in the way: in the vertical stability of the rear body vertical fairing parts, borrowed three screw holes solid