论文部分内容阅读
1 总则1.1 本标准适用于以定型载重汽车(或定型底盘)改装,并装置有臂架式随车起重机的运输汽车(以下简称起运车)。对于汽车部份的技术要求,按汽车生产厂的规定执行。1.2 起重作业工作条件1.2.1 地面坚实、平整、倾斜度不大于1∶20,作业过程不得下陷。1.2.2 环境温度为-25℃～+40℃。1.2.3 风速不超过13.8m/s(六级风)。1.3 起运车应符合本标准要求,并按照规定程序批准的图样及文件制造。1.4 型号与参数1.4.1 型号
1 General 1.1 This standard applies to the fixed-type truck (or fixed chassis) conversion, and equipped with boom-mounted truck crane transport vehicles (hereinafter referred to as the truck). For the car part of the technical requirements, according to the provisions of the car manufacturer. 1.2 lifting operations working conditions 1.2.1 solid ground, flat, not more than 1:20 tilt, the process may not subsidence. 1.2.2 Ambient temperature is -25 ℃ ~ +40 ℃. 1.2.3 wind speed does not exceed 13.8m / s (six wind). 1.3 The carrier shall comply with the requirements of this standard and be manufactured in accordance with the drawings and documents approved by the prescribed procedures. 1.4 models and parameters 1.4.1 model