一台用于材料辐照损伤研究的双离子束注入器的研制

来源 :中国原子能科学研究院年报 | 被引量 : 0次 | 上传用户:skynini83
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
随着反应堆技术的发展,材料的辐照损伤研究越来越受到人们的重视。采用现有反应堆开展中子辐照的方法要达到先进核能系统所需的剂量值,至少需要几年甚至几十年的时间。采用离子辐照模拟中子辐照的方法可将辐照时间缩短两到三个数量级,有利于开展大规模的反应堆材料的实验研究。本工作研制了一台氢氦双离子束注入器,可实现氢和氦两种粒子的同轴注入,用于模拟 With the development of reactor technology, more and more attention has been paid to the research on irradiation damage of materials. The use of existing reactors for neutron irradiation requires at least several years or even decades to reach the dose levels required for advanced nuclear energy systems. Using ionizing radiation to simulate neutron irradiation can shorten the irradiation time by two to three orders of magnitude, which is good for large-scale experimental research on reactor materials. In this work, a hydrogen-helium dual-ion beam injector was developed to coaxially inject hydrogen and helium particles for simulation
其他文献
最近中央许多文件中都强调要提高我国科技的自主创新能力,“十一五”规划建议中也把自主创新提到战略高度,说明了创新是科研工作的本质,也说明了自主创新是科学技术发展的战
粒子加速相位规划、粒子轨道对中、纵向运动匹配、径向运动稳定性和轴向运动稳定性等许多关键束流动力学问题都集中于中心区,中心区设计的好坏将直接影响加速器引出束流的品
《石渠宝笈》是乾隆九年至嘉庆二十一年(1744—1816)清宫内府编撰、刊印的一部鉴定和著录清宫书画的典籍。它是在乾隆皇帝亲自授意下,由内廷近臣编写的古代书画名录,乾隆十年
根据强流束流动力学的研究结果,前期设计的800 MeV强流回旋加速器CYCIAE-800的理论极限流强为1mA。为提高理论极限流强、减小束流损失,对加速器布局进行了调整,主要是增大了
As the leading nuclear base in China,CIAE continued its pursuit of building itself into a world-class nuclear R&D center with comprehensive capabilities in the
In 2015,Radiation Metrology Division of China Institute of Atomic Energy organized an environmental monitoring of nuclear radiation measuring intercomparison,an
CYCIAE-230超导回旋加速器真空系统包括主加速腔真空系统和低温恒温器真空系统,其总体要求为:1)破坏大气后,在4 h内启动并保证加速器正常工作;2)泵口静态真空好于1×10~(-4)P
纳秒量级分辨率多电子效应实验腔真空腔的设计是为了进一步优化纳秒量级分辨率多电子效应实验腔,验证230 MeV超导回旋加速器高频系统发射机的设计,同时根据国外对于残余气体
R&D efforts of CIAE in 2015 were rewarded with a number of prizes as follows:One secondprize of National Award for Advances in Science and Technology;ten prizes
强流倍加器是核物理试验和核数据测量的重要工具,而大面积环形氚靶是强流倍加器的关键部件之一。目前国内没有这种特殊规格的大面积氚靶,且其不能进口,因此,大面积环形氚靶的