Transition of solidification path in nonequilibrium solidification of Ti-48Al-8Nb alloy

来源 :Rare Metals | 被引量 : 0次 | 上传用户:tom1313
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The solidification behavior of Ti-48Al-8Nb alloy under nonequilibrium solidification conditions was studied by electromagnetic levitation technique.The solidification conditions are different undercooling(△T)under the same cooling condition and different cooling methods at the same undercooling condition,respectively.In different undercooling conditions,when the undercooling is above a critical value(△T*≈211K),a remarkable morphological transition from typical hypoperitectic solidification to a sole solidification of the(3 phase resulting in the suppression of the peritectic reaction occurs.For melts with different cooling conditions at the same undercooling(△T≈85 K),the melt was rapidly cooled by quenching them in cooling media.With cooling rate increasing,a transition from β phase to peritectic α phase solidification mode is revealed for Ti-48Al-8Nb alloy. The solidification behavior of Ti-48Al-8Nb alloy under nonequilibrium solidification conditions was studied by electromagnetic levitation technique. The solidification conditions are different undercooling (ΔT) under the same cooling condition and different cooling methods at the same undercooling condition, respectively. undercooling conditions, when the undercooling is above a critical value (ΔT * ≈211K), a remarkable morphological transition from typical hypoperitectic solidification to a sole solidification of the (3 phase resulting in the suppression of the peritectic reaction occurs. For melts with different cooling conditions at the same undercooling (ΔT≈85K), the melt was rapidly cooled by quenching them in cooling media. Slow cooling rate increasing, a transition from β phase to peritectic α phase solidification mode was revealed for Ti-48Al-8Nb alloy.
其他文献
In this study,mesoporous silica/iron oxide nanocomposite (MCM-Fe2O3) was synthesized via hydrothermal technique.The chemical synthesis of MCM-Fe2O3 nanocomposit
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
以褐铁型红土镍矿为原料,研究了其硫酸熟化过程及其矿物物相转变机制。考察了熟化过程中温度、时间、硫酸量、加水量对熟化过程的影响,结果表明:Ni,Co浸出率随熟化温度的升高
以硝酸、氨水、硝酸铵、商业氧化钇及草酸为初始原料,加入分散剂聚乙二醇(PEG2000)及表面活性剂十二烷基苯磺酸钠(SDBS),采用改进的草酸沉淀工艺成功制备氧化钇前驱体Y(NH_4)
为了研究活塞合金中的析出相,以及Cu元素对其液态析出相形成规律的影响,本文分析了Al-Si-Cu-Mg-Ni系活塞合金中的常见液态析出相的组成。制备了5种Al-Si-Cu-Mg-Ni系活塞模型
This study systematically compared the influences of yttrium(Y),boron(B),and carbon(C) on the microstructural refinement and properties of a Ti-43Al-5Nb alloy.T
Magnesium hydroxide (MH) whiskers were modified via in situ polymerization of n-butyl acrylate and maleic anhydride.Sodium dodecyl sulfonate was used as emulsif
应该说,作为一个高科技园区,中关村迄今为止依然是成功的:从以商贸为主的电子一条街孵化出了9000多家企业,这本身就是一个了不起的成就,何况其中还有像联想、方正这样的出类
系统研究了添加Ti和C对NdPrFeB合金厚带晶化过程及磁性能的影响.结果表明,Ti的添加可以抑制合金中(Nd,Pr)2Fe23B3亚稳相的生成并细化晶粒从而极大地提高矫顽力;而同时添加Ti和
目的:以甜叶菊组培苗为材料,研究培养温度、甘露醇及多效唑等三个因素对种质保存时再生苗生长的影响,并检测离体保存过程中甲基化水平与模式的变化。方法:离体保存试验采用正