论文部分内容阅读
The high-temperature oxidation behaviors of the NiCrAlYSi/P-YSZ thermal barrier coatings (TBCs) produced by electron beam-physical vapor deposition (EB-PVD) on directionally solidified (DS) and single crystalline (SC) Ni-based superalloy substrates were investigated. The cross-sectional microstructure investigation, isothermal and cyclic oxidation tests were conducted for the comparison of oxidation behaviors of TBCs on different substrates. Although TBC on DS substrate has a relatively higher oxidation rate, it has a longer thermal cycling lifetime than that on SC substrate. The primary factor for TBC spallation is the mismatch of thermal expansion coefficient (TEC) of the bond coat and substrate. The morphological feature of thermally grown oxide (TGO) has a strong influence on the TBC performance. By optimizing the elemental interdiffusion between bond coat and substrate, a high quality TGO layer is formed on the DS substrate, and therefore the TBC oxidation behavior is improved.
The high-temperature oxidation behaviors of the NiCrAlYSi / P-YSZ thermal barrier coatings (TBCs) produced by electron beam-physical vapor deposition (EB-PVD) on directionally solidified (DS) and single-crystalline Ni- based superalloy substrates investigated. The cross-sectional microstructure investigation, isothermal and cyclic oxidation tests were conducted for the comparison of oxidation behaviors of TBCs on different substrates. TBC on DS substrate has a relatively higher oxidation rate, it has a longer thermal cycling lifetime than that on The primary factor for TBC spallation is the mismatch of thermal expansion coefficient (TEC) of the bond coat and substrate. The morphological feature of thermally grown oxide (TGO) has a strong influence on the TBC performance. By optimizing the elemental interdiffusion between bond coat and substrate, a high quality TGO layer is formed on the DS substrate, and therefore the TBC oxidation behavior is improved.