High-performance sandwiched hybrid solid electrolytes by coating polymer layers for all-solid-state

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:yuesiyi
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Poly(vinylidenefluoride-co-hexafluoropropy-lene)(P(VDF-HFP))/Li1.3Al0.3Ti1.7(PO4)3(LATP)/P(VDF-HFP)sandwiched hybrid solid electrolytes were precisely tailored and successfully fabricated to assemble into all-solid-state lithium-ion batteries,which were systematically evaluated on microstructure,morphology,thermal stability and electrochemical performance.The sandwiched hybrid solid electrolytes can achieve intimate contact with cathode and anode electrodes to present an excellent interfacial stability.Furthermore,the sandwiched hybrid solid elec-trolytes possess flexible surface,wide electrochemical working window of 4.7 V,high ionic conductivity of 0.763 mS·cm-1 and high thermal stability of 460℃,which may contribute to realizing the practical application in all-solid-state lithium-ion batteries.The assembled cells with the hybrid solid electrolytes can quickly stabilize at a specific discharge capacity of 145.4 mAh·g-1 at 0.1C after only 5 cycles and present admirable rate performance.In addition,morphology characterizations of the sandwiched hybrid solid electrolytes after long-term cycles show a relatively integrated structure coating with a compact LATP layer.The investigations afford a promising strategy that the sandwiched hybrid solid electrolytes can overcome the mechanical limitations of the interface between electrodes and inorganic solid electrolytes to provide favorable properties for all-solid-state lithium-ion batteries.
其他文献
Ni-rich lithium nickel-cobalt-manganese oxides(NCM)are considered the most promising cathode mate-rials for lithium-ion batteries(LIBs);however,relatively poor cycling performance is a bottleneck preventing their widespread use in energy systems.In this w
A new Fe-based amorphous-crystalline com-posite without non-metallic elements,Fe55Cr15Mo15 Ni10W5,was prepared by melt-spinning.The formation ability and structure information were investigated by X-ray diffractometer(XRD),energy-dispersive spectrom-eter(
This study investigated the morphology,struc-ture and tribological properties of the three samples pro-duced by anodic oxidation of Ti10V2Fe3Al in a sulfuric/phosphoric acid electrolyte(SPA),a near-neutral sodium tartrate electrolyte without nanoparticles
Three-dimensional(3D)thin-film electrodes are promising solution to the volume change of active mate-rials in lithium-ion batteries.As a conductive current col-lector,the 3D TiO2 nanotube array networks(TNAs)have a one-dimensional stable electronic conduc
Thermal barrier coatings(TBCs)consisting of La2Ce2O7(LCO)and Y2O3-stabilized-ZrO2(YSZ)double-ceramic layer and Dy/Pt co-doped NiAl bond coat were produced by electron beam physical vapor deposition(EB-PVD).Thermal cyclic performance of the TBCs was evalua
A new high-pressure die-cast(HPDC)Mg-4A1-3La-lCa-0.3Mn(ALaX431)alloy with high strength has successfully been fabricated.This HPDC alloy in peak-aged state exhibits tensile yield strength(TYS)of 220 MPa at room temperature and TYS of 145 MPa at 250℃,highe
The microstructure of nickel-based single-crys-tal(SC)superalloys has a pivotal influence on their creep properties.The addition of the Re element not only enhances the long-term creep properties of nickel-based SC superalloys,but also results in the form
Magnesium hydride(MgH2),which possesses high hydrogen density of 7.6 wt%,abundant resource and non-toxicity,has captured intense attention as one of the potential hydrogen storage materials.However,the prac-tical application of Mg/MgH2 system is suffering
ZrCoCe getter films with thickness of~2.3 μm were deposited on Si(100)wafers by direct current(DC)magnetron sputtering process.A 400-nm-thick Pd protection layer was then deposited on the as-deposited ZrCoCe film without exposure to atmosphere.Microstruct
In this study,the fine-grained Mg-Li alloy was prepared by friction stir processing(FSP).The microstructure and mechanical properties of the friction-stir-processed(FSPed)Mg-Li alloy were investigated.The result showed that FSP resulted in the grain refin