我厂产品上的套筒滚子链大小链轮,有一道齿形两侧倒角工序。对这道工序,我们采用了切削刃口方向相反的两把小型角度铣刀在刀杆上对装,中间加隔环调节开档距离,利用锥面刃口同时切削加工成形,如图1。小型角度铣刀,由工艺人员设计。开始时,按照标准刀具图册技术参数,方制,外形尺寸缩小。经使用 I plant products on the sleeve roller chain chain size sprocket, chamfer both sides of a toothed process. For this process, we use the two cutting edges in the opposite direction of the two small angle cutter mounted on the arbor, the middle of the spacer ring to adjust the open distance, the use of conical cutting edge cutting while forming, as shown in Figure 1. Small angle milling cutter, designed by craftsmen. At the beginning, according to the standard tool album technical parameters, the system, the reduced size. Used