我厂生产全液压悬挂式SSG-8100型100吨平板车等产品的液压管路,采用三瓣式高压胶管接头。三瓣式胶管接头的结构见图1。要装配三瓣式胶管接头,需要有一个相当大的压力,将三瓣外壳同时压紧,并使其外缘位于同一圆周上,以使后环能较顺利地套入。为此,我们设计制造了一种装拆工具(图2)。经实践证明,节省辅助时间、提高生产效率、使用效 I plant the entire hydraulic suspension type SSG-8100 100 tons of flatbed and other products of hydraulic pipelines, the use of three-valve high-pressure hose connector. Three-valve hose connector structure shown in Figure 1. To assemble a three-piece hose fitting, a considerable amount of pressure is required to compress the three-piece housing at the same time with its outer edge on the same circumference so that the back ring can fit more smoothly. To this end, we designed and manufactured a demolition tool (Figure 2). Proved by practice, saving auxiliary time, improve production efficiency and effectiveness