论文部分内容阅读
我厂为解决行车的严重漏油现象,在二硫化钼用于金属切削机床取得初步成果的基础上,先后在七部行车上使用MoS_2润滑剂,润滑行车各部齿轮箱,彻底解决了漏油现象,并减少了齿轮磨损,深受群众的欢迎。一、二硫化钼润滑剂的操作工艺1.清洗:将各齿轮箱打开解体,先用汽油将齿轮和轴清洗,再用乙醇或丙酮冲洗,务必将油污去乾净。2.加热:用乙炔或烘箱均匀地将齿轮和轴加热到70～80℃,使用乙炔加热时,尽量不直接加热齿面,应烤内圈或齿侧部,使热量均匀的传到齿
In order to solve the problem of serious oil leakage in our factory, based on the preliminary results of molybdenum disulfide used in metal cutting machine tools, we successively lubricated the gearbox of each department with MoS_2 lubricant on seven vehicles to solve the problem of oil spill , And reduce gear wear, welcomed by the masses. First, the operation process of molybdenum disulfide lubricant 1. Cleaning: The gear box open disintegration, first gear and shaft cleaning with gasoline, then rinse with ethanol or acetone, be sure to clean the oil. 2. Heating: Use acetylene or oven evenly to gear and shaft heated to 70 ~ 80 ℃, the use of acetylene heating, try not to heat the tooth surface directly, should be baked inner ring or tooth side, the heat evenly spread to the teeth