本专利系鋁电解生产用的連續预焙阳极,这种阳极是将预焙好的、作替換用的碳块粘結在原有阳极的頂面上,以补偿其在电解槽內的逐漸消耗。在电解槽操作期間,阳极垂直的悬挂着并浸入溫度約1000℃的熔融电解质中。阳极底掌在电化学过程中不断消耗,因此阳极必須徐徐下降(采用机械裝置)以保持所需的极距。阳极通过銅或鋁导体通电,此导体至少要有一柔軟段,以适应阳极的移动。阳极与导体间采用自阳极上部或側部插入的阳极棒相連接,阳极 This patent is a continuous prebaked anodes for aluminum electrolysis production, the anode is a pre-baked, replacement carbon block bonded to the top of the original anode to compensate for its gradual consumption in the electrolyzer. During operation of the cell, the anode is suspended vertically and immersed in the molten electrolyte at a temperature of about 1000 ° C. The bottom of the anode is continuously depleted in the electrochemical process, so the anode must be slowly lowered (using mechanical means) to maintain the desired pole pitch. The anode is energized with copper or aluminum conductors, which must have at least one soft segment to accommodate the movement of the anode. The anode and the conductor are connected with the anode rod inserted from the upper part or the side part of the anode, and the anode