钢丝绳与接头的固定,其传统的结构是将钢丝绳与接头联连部分松散,去掉蔴芯塞入接头的锥孔,再从另一端打入锥销,然后浇注铝合金使之固定。这种传统结构形式比较复杂,装配、制造费工,且质量又不稳定,同时联接强度恒低于钢丝绳的强度。事实上,即使钢丝绳与接头联接可靠,但由于靠近接头的部分钢丝绳已松散成一束钢丝,也降低了强度。再者当钢丝绳打入锥销 The traditional structure of the wire rope and the joint is that the wire rope is loosely connected with the joint, the core hole is plugged into the tapered hole of the joint, the cone pin is then driven from the other end, and then the aluminum alloy is poured to be fixed. This traditional structure is more complex, assembly, manufacturing labor, and the quality is not stable, while the connection strength is always lower than the strength of steel wire rope. In fact, even if the wire rope is connected to the joint reliably, the strength is reduced because the part of the rope close to the joint has been loosened into a bundle of wires. Also when the rope into the cone pin