模具零件横向运动机构这里介绍几种用斜楔、连杆等推动模具零件作横向运动的简单机构。图1是最常用的斜楔机构,由装在上模板c的斜楔d推动模具零件e作横向运动。尺寸α,b和角度α确定移动距离,α一般介于45°与60°之间。图2和3是类似的简单机构。图4是用一个斜楔推动左右两个模具零件向外运动。图5是用对称的两个斜楔同时推动两个模具零件向 Lateral movement of mold parts Here are several introduced with wedges, connecting rods and other components to promote lateral movement of the simple mechanism. Figure 1 is the most commonly used wedge mechanism, mounted on the template c wedge d promote the mold parts e for lateral movement. The dimensions α, b and the angle α determine the travel distance, with α generally between 45 ° and 60 °. Figures 2 and 3 are similar simple mechanisms. Figure 4 is a wedge to promote left and right two mold parts outward movement. Figure 5 is symmetrical with two wedges while pushing the two mold parts to