In this paper, a novel unified plasticity methodology is proposed to allow the coupling of rate-and temperature-sensitivity of engineering alloys as well as the non-linear kinematic hardening behavior often observed during cyclic loading. The proposed methodology is general in the sense that an arbitrary constitutive model may be chosen for the viscoplastic part, as well as the cyclic part. We adapt our model with a physically-motivated viscoplasticity flow rule and a nonlinear kinematic hardening model. In contrast with other unified plasticity models, the simplified theory involves few material parameters that can be readily calibrated from standard mechanical tests. The capabilities of the proposed theory are demonstrated for a hot rolled annealed 304 L stainless steel supplied by Vimetal Peckover. The model is tested with stress–strain curves obtained from standard tensile and cyclic uniaxial tests at various strain amplitudes and strain-rates, and good accuracy of the response is obtained for strains up to 15%, within a temperature range of 293–673 K. We note that the cyclic plasticity model in our adapted theory can be readily enhanced with ratchetting, mean stress relaxation, strain amplitude history, Masing effects or other complex capabilities. In this paper, a novel unified plasticity methodology is proposed to allow the coupling of rate-and temperature-sensitivity of engineering alloys as well as the non-linear kinematic hardening often see during cyclic loading. The proposed methodology is general in the sense that an arbitrary constitutive model may be chosen for the viscoplastic part, as well as the cyclic part. We adapt our model with a physically-motivated viscoplasticity flow rule and a nonlinear kinematic hardening model. In contrast with other unified plasticity models, the simplified theory involves The capabilities of the proposed theory are demonstrated for a hot rolled annealed 304 L stainless steel supplied by Vimetal Peckover. The model of tested with stress-strain curves obtained from standard tensile and cyclic uniaxial tests at various strain amplitudes and strain-rates, and good accuracy of the response i We note that the cyclic plasticity model in our adapted plastic can be readily enhanced with ratchetting, mean stress relaxation, strain amplitude history, Masing effects or other complex capabilities.